Removing Wing Rail
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Unscrew self-tapping screws -1-
using > VAS 852 007A - FDS sockets
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Self-tapping screws
IMPORTANT:
Punch rivets in this area are not replaced.
- 1.1
Grind off the reshaped die side of the punch rivets in area -A and B-
up to the fastening rail.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Punch rivets
- 1.2
Heat bonding areas. > V.A.G 1416 - Hot-air blower
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Bonding areas
- Pull wing rail from the ground punch rivets and remove.