Preparing Wing Rail For Installation
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
- Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
- The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
- Do not begin bonding work until all materials and tools necessary for later repair work are available.
- Only for existing ground-down punch rivets:
Copy the positions of the ground-down punch rivets -A and B-
to the wing rail.
Punch rivets
- Only for existing ground-down punch rivets:
Cut out punch rivets at the marked positions > Cut-outs.
Cut-outs
- Prepare marked areas > Wing rail
for bonding.
5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE
Wing rail