Preparing Connection Area Of The Body For Installing B-Pillar Reinforcement

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT:

Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
Do not begin bonding work until all materials and tools necessary for later repair work are available.

Align the sealing surfaces and connections of the body.
De-burr connection points and prepare them for joining.
Remove remaining pieces of the bulkhead part -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bulkhead part

Prepare the marked area > Bonding area for bonding, riveting and resistance spot-welding.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding area

Yellow	Bonding and resistance spot-welding
	> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE
Orange	Bonding and riveting
	> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE