Preparing Connection Areas Of Body For Installing Outer Roof Pillar

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Prepare connection areas > Connection areas for bonding and riveting.
5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection areas
Prepare rear connection areas > Connection areas, rear for bonding and riveting.
5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection areas, rear
Prepare lower connection areas > Connection areas, lower for welding.
5X00IN10 WELDING ALUMINIUM

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection areas, lower
Prepare marked area -A- for resistance spot-welding.
5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joint area