Preparing Roof For Installation
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
- Before final assembly, make s jre you fully understand all t he work steps involved and carry out a trial assembly without applying adhesive.
- The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
- Do not begin bonding work until all materials and tools necessary for later repair work are available.
IMPORTANT:
The help of another person is required.
- Fit in roof and secure it to the body.
- Punch holes for flow-form rivets > Punch rivets
using > VAS 852 001 - dent removal unit, aluminum
and > VAS 6790 - Compact booster
.
5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
Punch rivets
- Punch holes for flow-form rivets -A and B-
using > VAS 852 001 - dent removal unit, aluminum
and > VAS 6790 - Compact booster
.
5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
Punch rivets
- Remove the roof.
- Prepare marked areas -A-
for bonding and riveting.
5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE
Bonding areas
- Prepare bonding surfaces -B and C-
.
5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE
Bonding areas