LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> 19 Engine - Cooling 3.0L -- 9YA - Cayenne (9YA) >> WM, 197819 Removing And Installing Coolant Temperature Sensor (V6 Turbo) >> Installing Coolant Temperature Sensor >> Installing Coolant Temperature Sensor (Cylinder Housing)

Installing Coolant Temperature Sensor (Cylinder Housing)

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace O-ring.
    2. 1.2  Tighten screw on coolant temperature sensor.

      > Tightening torque 9 Nm (6.5 ftlb.) 

scientia non olet · About LEMON Manuals