Securing Main Wire Harness In Engine Compartment At The Right
- Secure in reverse order. Pay particular attention to the following:
Tighten fastening nuts for positive cables in potential distributors to > Tightening torque 9 Nm (6.5 ftlb.) .
Tighten fastening nut on ground point for right spring strut mount to > Tightening torque 9 Nm (6.5 ftlb.) .
Tighten Voss screws securing air line to air-spring strut to > Tightening torque 3 Nm (2 ftlb.) .
Tighten fastening screws on coolant reservoir to > Tightening torque 9 Nm (6.5 ftlb.) .
Tighten fastening nut at ground point for upper right longitudinal member to > Tightening torque 9 Nm (6.5 ftlb.) .
Tighten fastening nut at ground point for front right longitudinal member to > Tightening torque 9 Nm (6.5 ftlb.) .