Subsequent Work

1. Install front pneumatic spring.

   > 553119 REMOVING AND INSTALLING FRONT PNEUMATIC SPRING 

2. Install ignition module for front lid (pedestrian protection).

   > 696919 REMOVING AND INSTALLING IGNITION MODULE FOR FRONT LID (PEDESTRIAN PROTECTION)

3. Install wiper linkage.

   >  WM, 921919 REMOVING AND INSTALLING WIPER LINKAGE 

4. Install front lid.

   > 552219 REMOVING AND INSTALLING FRONT LID 

5. Check gap dimensions of front lid and adjust if necessary.

> 552215 ADJUSTING FRONT LID