Removing Front Lock Lower Part
- Loosen front lock lower part.
Unclip electric plug connections -1- from front lock carrier -arrows- .
Electric plug connections
Pull off cable holder -1- .
Cable holder
Unscrew fastening screws -2- .
Fastening screws
Pull front lock lower part up and out until the bowden cable, release element and microswitch are accessible.
- Release microswitch -1-
using a suitable tool and pull it out of the front lock lower part -2-Arrow-
.
Microswitch
- Unclip bowden cables -1-
from front lock lower part -2-Arrow-
.
Bowden cables
- Remove front lock lower part.