Removing Rear Side Window
WARNING:
Vehicle windows removed and installed incorrectly
- Danger of cuts
- Risk of eye injuries
→ Wear personal protective gear.
→ Always shut off power supply when replacing cutting knife.
Information
The new rear side window is supplied complete with trim frame and trim.
Information
Headliner
- Do not damage the headliner -1- .
- Carefully lever off trim frame -1-
using a plastic wedge.
Trim frame for rear side window
- Unclip seal -1-
in the upper area. -Arrow-
Seal
- Pierce adhesive bead on the rear side window -1-
from the inside out using an awl -2-
and cutting thread on the lower C-pillar.
Make sure not to damage the headliner and the seal for the C-pillar.
Awl
Information
- The procedure for removing car windows is described in
Information
- Fixing clips will also be cut when removing the rear side window. Greater force will be needed at these points.
- Removing rear side window
- 4.1 Attach suction cup for > VAS 861 001A - window removal set to the outer rear side window.
- 4.2 Cut out rear side window using cutting cord.
- 4.3 Rear side window