Removing Motor For Sun Blind

NOTIFICATION 

Voltage peaks 

• Risk of damage to electrical load or to the control unit 

  → Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).

  → Switch off electrical loads before disconnecting or removing them.

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Always wear approved work clothes and shoes when carrying out assembly work. 
• Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation. 
• Do not touch electric pins and plug contacts. 

1. Remove motor for sun blind -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Sun blind motor

   1. 1.1 Release and unplug electric plug connection -2-  .
   2. 1.2 Unscrew and remove screws -3-  .
   3. 1.3 Remove sun blind motor -1-  .