Removing Padding For Rear Backrest (1/3-Split Folding Rear Seat)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Seat cover on rear backrest, bottom

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric wire harness

1. 2.1 Release and unplug electric plug connections -1-  .

   Information 

   Mark installation positions!

2. 2.2 Disconnect electric wire harness -2-  on the seat frame at the bottom.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Seat cover on rear backrest

1. 3.1 Detach seat cover on rear backrest -1-  at the seat backrest.
2. 3.2 Feed electric wire harness -2-  through the seat cover on the rear backrest -1-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Velcro fasteners

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tab

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tab

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Seat cover on rear backrest

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Side airbag catcher

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Headrest guide, left

1. 9.1 Press padding for rear backrest (1/3-split folding rear seat) -1-  away from the backrest frame.
2. 9.2 Release locking lug -2-  and press out headrest guide at the left -3-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Headrest guide, right

1. 10.1 Press padding for rear backrest (1/3-split folding rear seat) -1-  away from the backrest frame -arrow A-  .
2. 10.2 Release headrest guide at the right -2-arrow B-  and press it out.