Installing Padding For Rear Seat Surface (1/3-Split Folding Rear Seat)

1. Installation is performed in reverse order. Pay particular attention to the following:

   Information 

   Fastening grommets version 1  must not be re-used and must be replaced by fastening grommets version 2. 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Fastening grommets version 1

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Fastening grommet version 2

   • Fastening grommets version 1 
   • Fastening grommets version 2 
2. Fastening grommet version 1 
3. Fastening grommet version 2 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fastening grommets version 2

1. 3.1 Align position lugs -1-  towards the front.
2. 3.2 Engage fastening grommets version 2 -2-  in the seat frame -3-Arrow-  .