Installing Padding For Front Seat
- Installation is performed in reverse order. Pay particular attention to the following:
Tightening torque for screw securing front cover to seat frame: > Tightening torque 8 Nm (6 ftlb.)
Tightening torque for screw securing fold-out compartment to seat frame: > Tightening torque 8 Nm (6 ftlb.)
Tightening torque for screw securing tubular frame holder to seat frame: > Tightening torque 7.5 Nm (5.5 ftlb.)
Tightening torque for screw securing fire extinguisher holder to tubular frame holder: > Tightening torque 8 Nm (6 ftlb.)