Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screws on roof spoiler | Tightening torque | 2.8 Nm (1.8 ftlb.) | |||
| Nuts on roof spoiler | Tightening torque | 6 Nm (4.5 ftlb.) | |||
| Roof spoiler centre trim to roof (H40) | Gap | Gap dimension | 5.5 mm | + 1.5 mm,- 0.5 mm | |
| Roof spoiler centre trim to roof (H40) | Offset | Gap dimension | - 1.2 mm | + 1.5 mm,- 0.5 mm | |
| Fin to roof spoiler (HP258_1) | Gap | Gap dimension | 4.7 mm | + 1.5 mm,- 0.5 mm | |
| Fin to roof spoiler (HP258_3) | Offset | Gap dimension | 0.3 mm | + 0.5 mm,- 0.5 mm |