Installing Side Retaining Strip

Installation is performed in reverse order. Pay particular attention to the following:

Information 

• Carefully clean any dirt, grease, wax and other impurities off the fitting area of the body using isopropanol. 
• Always use a clean cloth. 
• The room and object temperature must be at least +18°C. 
• Air humidity must be 40% - 60%. 

1. Check anti-chafing film -1-  for damage and replace it if necessary -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Anti-chafing film

2. Tighten screws -1 and 2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Side retaining strip

   1. 2.1 Tighten screws -1-  .

      > Tightening torque 3 Nm (2 ftlb.) 

   2. 2.2 Tighten screw -2-  .

      > Tightening torque 2.5 Nm (1.75 ftlb.)