Installing Centre Retaining Strip

Information 

• Carefully clean any dirt, grease, wax and other impurities off the fitting area of the body using isopropanol. 
• Always use a clean cloth. 
• The room and object temperature must be at least +18°C. 
• Air humidity must be 40% - 60%. 

Installation is performed in reverse order. Pay particular attention to the following:

1. Tighten nuts -2-  .

   > Tightening torque 4 Nm (3 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Centre retaining strip