Installing Rear Apron
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten screw securing rear apron to retaining frame to > Tightening torque 2.5 Nm (1.8 ftlb.) .
Tighten screw securing rear apron to heat shield to > Tightening torque 3.5 Nm (2.6 ftlb.) .
Tighten screw on tailgate lock to > Tightening torque 10 Nm (7.4 ftlb.) .
Tighten screw securing rear apron to frame for light to > Tightening torque 2.5 Nm (1.8 ftlb.) .
Tighten screws securing rear apron to rear retaining frame to > Tightening torque 2.5 Nm (1.8 ftlb.) .