Subsequent Work
- Position the brake -2-
air duct, screw in the fastening screw -1-
and tighten it to > Tightening torque 3 Nm (2 ftlb.)
.
Fastening screws
- Only without Sport Design: Install front wheel covers.
- Install wheel housing liner front in the front bumper area.
> WM, 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER
- Vehicles without power unit guard
Fasten front cover in the area of the front bumper and air duct brake.
> WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY
- Vehicles with power unit guard
Install power unit guard.
> Refer to appropriate Engine article
- Installing the cover on lock carrier.
> WM, 703919 REMOVING AND INSTALLING COVER FOR FRONT LOCK SUPPORT
- Secure ground strap for battery.
> WM, 978509 - LOOSENING AND SECURING GROUND STRAP FOR BATTERY
- For vehicles with front assistance systems:
Calibrate infrared camera.
> WM, 908019 REMOVING AND INSTALLING INFRARED CAMERA
Calibrate front corner radar.
> WM, 916625 CALIBRATING FRONT CORNER RADAR
Calibrate Surround View camera.