LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear (9YB) >> 5368 Wheel Housing Rear >> WM, 53685553 Replacing Inner Rear Wheel Housing >> Preparing Connection Areas Of The Body For Installing The Inner Rear Wheel Housing

Preparing Connection Areas Of The Body For Installing The Inner Rear Wheel Housing

  1. Align contact surfaces and connections of the body.
  2. De-burr connection points and prepare them for joining.

    Information 

    • Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive. 
    • The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed. 
    • Do not begin bonding work until all materials and tools necessary for later repair work are available. 
  3. Remove excess pieces of baffle -1-  .
    G16140466

    Excess pieces of baffle

  4. Prepare the marked areas for bonding and riveting.

    > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

    G16140467

    Bon ling are a

scientia non olet · About LEMON Manuals