Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Bore offset upwards | from old flow drill screw | Distance | 2.5 cm | ||
| drill bit | diameter | 4 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Adhesive application | Application depth | 0.5 mm | |||
| Apply adhesive | Application depth | 0.5 mm | |||
| Adhesive application | Application depth | 3 mm |