Technical Values
| Location | Des... | Type | Basic val... | Toleranc. | Toleranc... |
|---|---|---|---|---|---|
| Distance from connecting strip to B-pillar | Item A | Length | 18.5 mm | ||
| Flange length cut | Item A | Length | 20 mm | ||
| cut overlap | Length | 20 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| D-ill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 8.0 mm | |||
| Applying adhesive | Application depth | 0.5 mm | |||
| Applying adhesive | Application depth | 0.5 mm | |||
| Applying adhesive | Application depth | 3 mm | |||
| Drill bit | Diameter | 8, 0 mm | |||
| Distance from connecting strip to B-pillar | Item A | Length | 18.5 mm |