Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Dimension A | Distance from edge | Distance | 210 mm | ||
| Dimension B | Distance from bore hole | Distance | 137 mm | ||
| Dimension C | Distance from bead | Distance | 30 mm | ||
| Apply adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Adhesive application | Application depth | 0.5 mm | |||
| Adhesive application | Application depth | 3 mm | |||
| Apply adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Apply adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Adhesive application | Application depth | 3 mm |