Removing Rear Cross Member
- Remove punch rivets > Punch rivets
using > VAS 852 001 - dent removal unit
and > VAS 6790 - compact booster
.
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
Punch rivets
- Heat bonding areas > Bonding areas using > V.A.G 1416 - hot-air blower
.
Bonding areas
- Heat bonding areas on foam part of hinge reinforcement > Bonding area on foam part of hinge reinforcement
on both sides using > V.A.G 1416 - hot-air blower
.
Bonding area on foam part of hinge reinforcement
- Remove rear cross member.