LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Front (9YB) >> 5081 Cross Panel >> WM, 50811900 Removing And Installing Cross Panel (Upper Section) >> Installing Cross Panel (Upper Section)

Installing Cross Panel (Upper Section)

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screws securing cross panel (upper section) to bracket to > Tightening torque 10 Nm (7.4 ftlb.)  >.

    Tighten spring nuts securing heat shield to cross panel (upper section) to > Tightening torque 2.5 Nm (1.8 ftlb.)  >

    Tighten nuts securing external power connection to bracket to > Tightening torque 3 Nm (2.2 ftlb.)  >.

    Tighten nut securing power distributor at the front to external power connection to > Tightening torque 9 Nm (6.6 ftlb.)  >.

scientia non olet · About LEMON Manuals