Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Drill bit | Diameter | 3 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| rill bit | diameter | 6.6 mm | |||
| Drill bit | Diameter | 3.5 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 3.5 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | diameter | 6.6 mm | |||
| D | Distance | Length | 11 mm | ||
| E | Distance | Length | 16.5 mm | ||
| Drill bit | Diameter | 3.5 mm | |||
| Adhesive | Application depth | 0.5 mm | |||
| Adhesive | Application depth | 0.5 mm | |||
| Adhesive | Application depth | 3 mm | |||
| Drill bit | Diameter | 3.5 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Adhesive | Application depth | 0.5 mm | |||
| Adhesive | Application depth | 0.5 mm | |||
| Adhesive | Application depth | 3 mm |