Removing Central Computer

Information 

The fastening screw for the central computer is not installed on all vehicles.

If the fastening screw for the central computer is not  installed, start with step 2.

1. Loosen fastening screw for central computer.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Fastening screw for central computer

2. Release central computer -1-  using > 9570/1 - disassembly tool  (-Arrows-  ) and pull it out until the electric plug connections are accessible.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Central computer

   Information 

   The number of electric plug connections will vary depending on equipment.

3. Release and disconnect electric plug connections and cover them using suitable protection caps.
   1. 3.1  Release MOST plug connection -1-  (-Arrow-  ) and disconnect it.

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      MOST plug connection

   2. 3.2  Release securing clip -1-  , swivel it upwards -Arrow-  and disconnect combination connector -2-  .

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Combination connector

   3. 3.3  Release and disconnect antenna connector -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Antenna connector

4. Remove central computer.