Remove Automatic Transmission

1. Align automatic transmission -1-  in an upward direction and unscrew two screws -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Screws for power electronics

2. Loosen and unscrew screws in sequence -8 to 1-  .
   Fig 1: Automatic Transmission Flange Screws Tightening Sequence

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Tightening sequence for flange screws for automatic transmission

3. Disconnecting the automatic transmission flange.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Automatic transmission with workshop crane and round slings

1. 3.1 Secure two > VAS 501 015 - round slings-2-  to the automatic transmission as shown.
2. 3.2 Position > 3033 - lifting tackle  above the automatic transmission -3-  using a workshop crane -1-  .
3. 3.3 Engage round slings -2-  in the spring hooks of the > 3033 - lifting tackle-4-  .
4. 3.4 Check the position of the spindles -Arrows-  and adjust the height by turning the adjusting handles.
5. 3.5 Carefully raise the automatic transmission -1-  . A second person must guide the automatic transmission in order to prevent it from tilting.