Adjusting Height Of Front Lid

Close the front lid and check the setting.
> 5X00IN GAP DIMENSIONS
Unscrew screws -2- from front lid hinge -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front lid hinge
By moving the front lid -1- , adjust the contours at the hinges -Arrows- .
> 5X00IN GAP DIMENSIONS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front lid
Tighten screws on front lid -2- to > Tightening torque 20 Nm (15 ftlb.) .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front lid hinge
Close the front lid and check the setting again.
> 5X00IN GAP DIMENSIONS
If the setting does not match the required values, the steps must be repeated.