Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Nut on sliding roof element | Item 1 | Tightening torque | 2.4 Nm (1.8 ftlb.) | +/- 0.1 Nm (0.07 ftlb.) | |
|
Nuts on sliding roof element |
|||||
| Screw on sliding roof element | Item 2 | Tightening torque | 2.5 Nm (1.8 ftlb.) | +/- 0.3 Nm (0.2 ftlb.) | |
|
Screws on sliding roof element |
|||||
| Position of drivers with respect to each other | Measured value | 0 mm | +/- 1 mm | ||
| Position of drivers with respect to each other | Measured value | 0 mm | +/- 1 mm | ||
| Position of drivers with respect to each other | Measured value | 0 mm | +/- 1 mm | ||
| Position of drivers with respect to each other | Measured value | 0 mm | +/- 1 mm | ||