Installing Motor For Glass Sliding Roof

Information 

Do not continue to turn the motor after inserting the pinion into the drive cables because if you do, the control bolts will move closer together.

1. Install motor for glass sliding roof -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Installing motor for glass sliding roof

   1. 1.1 Push motor for glass sliding roof -1-  with drive wheel into the cut-out in the frame on the glass sliding roof.
   2. 1.2 Screw in and tighten screws -3-  > Tightening torque 3 Nm (2 ftlb.) +/- 0.3 Nm (0.2 ftlb.) 
   3. 1.3 Connect electric plug connection -2-  until it engages securely.

   Information 

   • After installing the motor for glass sliding roof, reinitializes the limit stops. 
   • Press the button forward (close switch position) and keep it pressed. 
   • The end positions are set and the sliding roof stops at the closed end position. 
2. Carry out a function test.