Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Minimum processing temperature | 000.043.305.59 | Minimum temperature | 15°C | ||
| Maximum processing temperature | 000.043.305.59 | Maximum temperature | 28°C | ||
| Foam filler bonding | 000.043.305.59 | Processing time at 15°C | 20 min | ||
| Foam filler bonding | 000.043.305.59 | Processing time at 28°C | 15 min | ||
| Minimum hardening temperature | 000.043.305.59 | Minimum temperature | 15°C | ||
| Maximum hardening temperature | 000.043.305.59 | Maximum temperature | 28°C | ||
| Assembly and endurance strength | 000.043.305.59 | Hardening time at 28°C | 3 h | ||
| Assembly and endurance strength | 000.043.305.59 | Hardening time at 15°C | 5 h |