LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 81 (Collision*** 5X Body - General - Wagon -- 971 - PANAMERA (971)) >> 5X Body - General >> WM, 5X00IN20 Working With Body Structural Foam >> Working With Body Structural Foam >> Processing Conditions

Processing Conditions

WARNING: This page is about a different variant/trim than selected.

During processing, the ambient and material temperature must be at least > Minimum temperature 15°C  and must not exceed a maximum temperature of > Maximum temperature 28°C  .

Higher processing temperatures reduce processing time.

> Processing time at 20°C 90 min 

> Processing time at 28°C 60 min 

scientia non olet · About LEMON Manuals