LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 71 (72 Seat Frames - Wagon -- 971 - PANAMERA (971)) >> WM, 726719 Removing And Installing Rear Backrest Mount >> Installing Load-Through Provision Mount >> Installing Rear Backrest Mount

Installing Rear Backrest Mount

WARNING: This page is about a different variant/trim than selected.

Information 

Replace nuts following removal.

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten nut on rear backrest mount: > Tightening torque 50 Nm (37 ftlb.) +/- 5 Nm (3.5 ftlb.) 

scientia non olet · About LEMON Manuals