Removing Front Lumbar Support

WARNING: This page is about a different variant/trim than selected.

Disconnect pneumatic line -1- at connection point -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disconnecting pneumatic line
Disengage pneumatic line -1- from holder -3- and guide it out.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disengaging pneumatic line
Disconnect electric plug connection -4- and disengage it from holder -5- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disconnecting electric plug connection
Disengage valve -6- from retaining clips -7- by pulling it upwards.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disengaging valve
Disengage pneumatic lines -8- from holder -9- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disengaging pneumatic lines
Disconnect electric plug connection -10- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disconnecting electric plug connection
Unscrew and remove screws -11- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrewing screws
Disconnect electric plug connection -12- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disconnecting electric plug connection
Feed front lumbar support -13- with valve forward through the backrest frame.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing front lumbar support
Remove retaining pins -14- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing retaining pins
Remove front lumbar support -13- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing front lumbar support