Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Fastening screw for starter | M10 x 40 | Tightening torque | 45 Nm (33 ftlb.) | + 10 % | - 15 % |
| Fastening nut securing B+ line to starter | M8 | Tightening torque | 23 Nm (17 ftlb.) | +/- 10 % | |
| Fastening nut securing control line to starter | M6 | Tightening torque | 9 Nm (6.5 ftlb.) |