LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (63 Bumper - Wagon -- 971 - PANAMERA (971)) >> WM, 631519 Removing And Installing Front Apron >> Installing Front Apron >> Installing Front Bumper

Installing Front Bumper

WARNING: This page is about a different variant/trim than selected.
  1. Install in reverse order.
  2. Screw in and tighten screws securing front bumper to mounting bracket > Tightening torque 5.5 Nm (4.1 ftlb.) 
  3. Screw in and tighten screws securing front bumper to wing at the left and right > Tightening torque 2.8 Nm (2 ftlb.) (2.1 ftlb.) 
scientia non olet · About LEMON Manuals