Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Screw securing oil pump sprocket to oil pump | M8 x 22/replace | Initial tightening | 20 Nm (15 ftlb.) | ||
| Screw securing oil pump sprocket to oil pump | M8 x 22/replace | Final tightening | + 90° | ||
| Screw securing oil pump to crankcase | M6 x 60 (3ea.)/replace | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screw securing oil pump to crankcase | M6 x 60 (3ea.)/replace | Final tightening | + 90° |