LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (17 - Engine - Lubrication 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 170419 Removing And Installing Oil-Pressure Sender (V6 Turbo) >> Installing Oil-Pressure Sender

Installing Oil-Pressure Sender

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Replace seal.
    2. 1.2 Screw in new oil-pressure sender using > 9594 - socket-wrench insert  and tighten to > Initial tightening 3 Nm (2 ftlb.)  > Final tightening + 45°  .
scientia non olet · About LEMON Manuals