Oil/Water Heat Exchanger
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Oil/water heat exchanger
| 1 | Oil/water heat exchanger |
| 2 | Screw, M6 x 18 > Tightening torque 9 Nm (6.5 ftlb.) |
| 3 | Seal/replace |
| 4 | O-ring/replace |
| 5 | O-ring/replace |
| 6 | Spray nozzle valve |
| 7 | Seal/replace |
| 8 | Screw plug, M22 x 1.5 > Initial tightening 40 Nm (30 ftlb.) > Final tightening + 45° |
| 9 | Positive crankcase ventilation hose |
| 10 | O-rings/replace |