Chain Housing Cover

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lower Chain Housing Cover Components Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Lower chain housing cover

1	Lower chain housing cover
2	Sealing ring/replace > Press-in depth 0 mm + 0 mm - 0.2 mm
3	Screw, M6 x 25/replace > Initial tightening 3 Nm (2 ftlb.) > Final tightening + 90°
4	Dowel sleeve
5	Chain housing cover on cylinder bank 1
6	Screw, M6 x 22 > Tightening torque 9 Nm (6.5 ftlb.)
7	Chain housing cover on cylinder bank 2
8	Screw, M6 x 22 > Tightening torque 9 Nm (6.5 ftlb.)
9	Screw, M6 x 22 > Tightening torque 9 Nm (6.5 ftlb.)
10	Solenoid valve for camshaft control
11	Screw, M6 x 18 > Tightening torque 9 Nm (6.5 ftlb.)
12	Heat shield on solenoid valve
13	M6 nut > Tightening torque 9 Nm (6.5 ftlb.)
14	Screw, M6 x 22 > Tightening torque 9 Nm (6.5 ftlb.)
15	Sealing ring, replace