Tightening Sequence For Crankcase Cover

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crankcase Cover Screws Tightening Sequence

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tightening sequence for crankcase cover

1 to 17	Screw/replace > Initial tightening 3 Nm (2 ftlb.)
1 to 11	Screw > Final tightening + 90°
12 to 17	Screw > Final tightening 9 Nm