LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (19 - Engine - Cooling 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 196919 Removing And Installing Control Valve (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install pulley.

    > 195319 REMOVING AND INSTALLING PULLEY (V6 TURBO) 

  2. V6 biturbo: 

    Install pressure pipe.

    > WM, 214119 REMOVING AND INSTALLING PRESSURE PIPE (V6 MONOTURBO)

  3. V6 monoturbo: 

    Install Centre intake-air distributor.

    > WM, 244619 REMOVING AND INSTALLING CENTRE INTAKE-AIR DISTRIBUTOR (V6 MONOTURBO)

  4. Fill in coolant.

    > 193817 DRAINING AND FILLING COOLANT