Installing Additional Coolant Pump

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fit additional coolant pump holder.

1.1 Position additional coolant pump holder -1- , fit double screws securing holder to chain housing cover -3- and tighten them.
> Tightening torque 9 Nm (6.6 ftlb.)

1.2 Fit and tighten screws securing additional coolant pump to holder -2- .

> Tightening torque 1.5 Nm (1.1 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Additional coolant pump (right cylinder bank)

Secure the coolant line.

2.1 Position coolant line and push on hose.
2.2 Tighten clamp -2- .

2.3 Fit and tighten nut -3- .

> Tightening torque 9 Nm (6.6 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Upper coolant line