LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (19 - Engine - Cooling 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 194019 Removing And Installing Coolant Reservoir >> Installing Coolant Reservoir

Installing Coolant Reservoir

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten screws for coolant reservoir > Tightening torque 8 Nm (5.9 ftlb.) 

    Tightening torque for nut on positive cable (jump-start terminal): > Tightening torque 9.7 Nm (7.5 ftlb.) 

scientia non olet · About LEMON Manuals