Installing Cooling Fan Housing (Radiator Frame)
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
The air guide can fall down when removing the cooling fan housing (radiator frame).
Roughly position the air guide in the vehicle during installation and reposition it when guiding in the cooling fan housing (radiator frame).
Information
Make sure that the cooling fan housing (radiator frame) is seated correctly in the upper guides.
- Installation is performed in reverse order. Pay particular attention to the following:
Screw in and tighten screws for cooling fan housing (radiator frame) > Tightening torque 5 Nm (3.5 ftlb.)