LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (48 Steering (3.0L Turbo -- 971 - PANAMERA (971))) >> WM, 485319 Removing And Installing Bellows For Steering-Gear Housing >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front-axle support (rear section)

    > 400819 REMOVING AND INSTALLING FRONT-AXLE SUPPORT

  2. Install tie-rod ball

    > WM, 488119 REMOVING AND INSTALLING TIE-ROD BALL 

  3. Align the suspension and make adjustments if necessary

    > WM, 449503 PERFORMING FRONT AND REAR SUSPENSION ALIGNMENT

scientia non olet · About LEMON Manuals