LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (48 Steering (3.0L Turbo -- 971 - PANAMERA (971))) >> WM, 481319 Removing And Installing Steering Column Casing >> Removing Steering Column Casing

Removing Steering Column Casing

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew screws -2-  and unclip trim panel -3-  .
    G15857069Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening trim panel

  2. Turn the steering wheel and unclip upper part of steering column casing -1-  through the openings -2-  using a suitable tool.
    G15857070Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Unclipping upper part

  3. Disengage restraining straps on rear steering column casing and remove casing.

    Vehicles with electrically adjustable steering column: 

  4. Unclip switch for steering column adjustment, disconnect electric plug connection and remove switch.

    Vehicles with manually adjustable steering column: 

  5. Move lever for steering column adjustment downwards.
  6. Turn the steering wheel and unscrew screws -4-. 
  7. Unscrew screw -5-  and remove lower part of steering column casing -1-. 
    G15857071Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing lower part