Disassembling Steering Wheel
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Unscrew screws -1-
and remove cover -2-
.
Removing rear cover
- Release control unit -1-
and pull it forward slightly.
Control unit mounting
- Release and disconnect electric plug connections -1-
for the rocker switches.
Releasing and disconnecting electric plug connections for rocker switches
- Unscrew screws -1-
and remove rocker switches -2-.
Removing rocker switches
- Unclip rear trims using a suitable tool -arrows-.
Removing rear trims
- Only for vehicles with heated steering wheel:
Disconnect electric plug connection -1- from rear trim -2-.
Disconnecting electric plug connection for heated steering wheel
- Unscrew and remove screws -1-.
Mounting for main cover
- Unclip main cover -1-
.
Loosening main cover
- Release and disconnect electric plug connections -1-
and remove main trim -2-.
Removing main cover
- Unscrew screws -1-
and remove multi-functional switch -2-
and front trim -3-.
Unscrewing screws
Only for vehicles with Mode switch:
- Release and disconnect electric plug connection -1-
and remove Mode switch -2-
from the steering wheel.
Mode switch
- Disconnect ground contacts -1-.
Disconnecting ground contacts
- Unscrew screws -1-
and remove contact bridge -2-
.
Mounting for contact bridge
Information
The number of electric plug connections will vary depending on equipment.
- Release and disconnect electric plug connection -1-
from the control unit -3-.
Releasing and disconnecting electric plug connection from control unit
- Release wire harness -1-
from the steering wheel skeleton -2-
(-arrows-
) and remove it.
Mounting for wire harness