Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Dimension X | Distance | 40 mm | |||
| Dimension Y | Distance | 150 mm | |||
| Dimension Z | Distance | 60 mm | |||
| Dimension W | Distance | 150 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 4 mm | |||
| Drill bit | Diameter | 4 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Applying adhesive | Application depth | 3.0 mm |